HomeMy WebLinkAboutVIII-04 Authorize Ambulance Purchase Agreement for the Hastings Fire DepartmentCity of Hastings 101 Fourth Street East Hastings, MN 55033-1944 Phone: 651-480-2350 www.hastingsmn.gov
City Council Memorandum
To: Mayor Fasbender & City Council Mmembers
From: John Townsend, Fire Chief
Date: July 3,2023
Item: Authorize Purchase of an Ambulance
Council Action Requested:
Approve purchase of ambulance
Background Information:
The 2024 Budget has $350,000.00 in the CIP/CEP for purchase of an ambulance. This ambulance is replacing
Medic 2. Medic 2 is a 2019 Chassis; with a 2002 box. Authorizing the purchase agreement now will put this
ambulance at an end of 2024-early 2025 delivery date. The City Council approved ordering this ambulance
10/3/2022 at a cost estimate of $300,000.00
Financial Impact: 2024 Budget CIP/CEP item. This is currently under the future budgeted amount. The current
cost estimate for this purchase is $311,539.00
Advisory Commission Discussion: N/A
Council Committee Discussion: N/A
Attachments: 1. Authorization for purchase quote
2. Quote
VIII-04
IN STORE PICKUP 01 - ST. PAUL, MN
06/13/2023 11:44:57 (O) 1
02
HASTING01 Q00473
City of Hastings Fire Dept. TO BE ASSIGNED
101 4th Street East
Hastings MN 55033
BOB HASELMAN 100
Attention: John Townsend
Description EXPIRY DATE: 06/16/2023 Amount
New FORD ULTRAMEDIC Road Rescue 311539.00
2024 Ford E450 Type III Road Rescue Ultramedic Per Contract
Dated 06-13-2023
Delivery
$2,500.00
Ford GPC Discount (subject to availability)
$-1,900.00
Ferno Equipment (subject to Ferno pricing)
$12,998.00
EEV Install, Radios, Computer Equip.NO FIRECOM
$9,016.00
Graphics by Advance
$2,900.00
All ancillary quotes subject to price increase!!
Grand Total
$311,539.00
Sale # 01 Subtotal: 311539.00
Total: 311539.00
Subtotal: 311539.00
Quote Total: 311539.00
VIII-04
QUOTATION
City of Hastings Everest Emergency Vehicle, Inc. John Townsend Bob Haselman
150 3rd Street East 8 South Owasso Blvd. Hastings, Minnesota 55033 Little Canada, MN 55117
651-236-8944
Exp. Date:07/31/2023
Quote No:-0030
Job/Order No: 638958 06/13/2023 11:36:02 Page 1PART NO S DESCRIPTION QTY
== RR-Road Rescue Boilerplate - 1.007 05/27/21 ==
ORDER COORDINATOR00-00-0015 Order Coordinator - Factory to assign 1
INFORMATION00-01-0999 RR, Information - Scope, Purpose and Classification 1
00-01-4000 S >SAVVIK buying Group Member - 12162 1WARRANTY
00-02-8100 RR, Warranty, Documentation 100-02-8200 RR, Warranty, Module Structural 1
00-02-8300 RR, Warranty, Electrical, Standard System 100-02-8400 RR, Warranty, Paint 1
00-02-8500 RR, Warranty, Conversion 1
== RR-Type 3 - UM 170" Module - 1.007 05/27/21 ==
00-05-0103 <RR, This unit built in accordance with KKK-A-1822F CN 10 Cabinet
Requirements 1
This unit as specified meets all requirements of KKK-A1822-F Change notice10.
All cabinets shall be labeled as to their capacity Rating.
01- CHASSIS REQUIREMENTS
FORD CHASSIS01-01-2114 S < >RR, 2024 Ford E450, 7.3L Gasoline, Cutaway, 158" WB 2023-5 1
(2) OEM AlternatorIncludes 2nd battery located in RF comp.
Rubber floor mat, OEM, std.Cab Headliner Vinyl
W/ Ford CO-Pilot 360
NOTE!!!Chassis pricing and Ford discount is subject to availability and pricing at the time
of Ford chassis invoice to REV.
CHASSIS OPTIONS01-03-00SR U <Replace the OEM Chrome Bumper 1
SR#2022137F
Replace the OEM E450 chrome bumper with a primer coated bumper.
ALTERNATORS
01-03-1001 Alternator - Standard OEM 1SUSPENSION
01-06-0400 RR, Shock Absorbers, Bilstein for Ford E-Series 101-07-0101 RR, Front Suspension, Ford E-Series 1
01-07-0200 RR, Rear Suspension, Ford E-Series OEM 101-07-1011 RR, Front Sway Bar, IPD/Roadmaster, E450 1
01-07-2020 RR, Rear Sway Bar, IPD/Roadmaster, E450 101-07-5202 RR, Rear Suspension, MorRyde RS -E Series 1
VIII-04
06/13/2023 11:36:02 Page 2
PART NO S DESCRIPTION QTY
HIGH IDLE
FRONT END ALIGNMENT01-17-7501 Front End Alignment, None- QC Check -Standard 1
CAB EXTERIOR OPTIONS01-19-14SR U <OEM Black Grill 1
Install a OEM black grill.
Part #8C2Z8200B from Greenway Ford.
***NOTE***
This is required to prevent any warranty claims for painting the chrome OEM
grill.
OUTSIDE REAR VIEW MIRRORS
01-20-5210 >RR, Mirrors, Velvac 2020XG Black, Heated/Remote Mirrors, E-Series 1
RR-CAB INTERIOR OPTIONS
01-21-3500 RR, Insulation, Cab, Thinsulate in Cab Ceiling (STANDARD)101-21-8888 U <Add (2) Whelen 3SRCCDCR red/white 3" lights to cab headliner 1
SR#2021810R-1
Add (2) Whelen 3SRCCDCR red/white 3" lights to cab headliner, (1) light
positioned over driver side shoulder area and (1) light positioned over
passenger side shoulder area. Lights to operate through separate rocker
switches,
Switches to be mounted over recess pocket on front console, see attached
drawing. The switches will be On(White) - Off - On (Red) and will be wired direct
to battery.
ENSURE THE LIGHT LOCATION IS OVER THE SHOULDER AND NOT THE
LAP. SAME AS 571381
01-21-SR00 U <Cab Interior (2) Pockets- Located below Pass through opening 1
SR#2022137F
Fabricate (2) aluminum folder pockets (like Hennepin County's) that are Black
polyurethane coated, each to be 13" wide,
To be mounted on the back wall of the interior cab, underneath the
pass-through window.
SEE CA DRAWINGS FOR LOCATION.
Bottom pocket to be 3.5 inches deep and start 12 inches from the floor.
Top pocket to be 3 inches deep and start 2" up from the bottom pocket.
IMPORTANT- SEE CA DRAWINGS WITH DIMENSIONS AND LOCATION.
01-21-SR02 U <Add Intermotive "Safe-T-Net" Module 1
SR#2022137F
Add Intermotive "Safe-T-Net Module to existing Intermotive high idle, this allows
customers 3rd party components
to receive data through the OBD2 connection without interruption. See Chris
Ellis for part numbers as he is
currently working with Intermotive engineering.
B-STN430-C
RR-SAFETY OPTIONS
01-22-6050 >RR, Anti-Theft Device, Idle Lock, Intermotive, Ford E Series 2020+1
RR-TIRES / WHEELS
VIII-04
06/13/2023 11:36:02 Page 3
PART NO S DESCRIPTION QTY
01-23-4100 < >RR, Spare Tire Bracket, Delete 1
Spare tire will be shipped loose.
WHEEL COVERS01-24-2211 <RR, Delete Wheel Inserts, Paint Wheels, Type 3 1
Black including spare.
BASE CONVERSION01-45-0606 S RR, Conversion, Ultramedic, Type 3, 170 Module, Ford 22-3 1
02 - MODULE REQUIREMENTS02-01-1006 < >RR, Ultramedic, 170" x 96"W Type 3 Module 1
Ultramedic III - 170"L x 96"W Type III (A.D.) Walk-Through Module. Includes 6"
cab recess. Aisle width to be 50". The interior headroom shall be 72".
02-01-2003 >RR, Increase Cab Extension to 10"1
02-01-2100 RR, Interior Headroom, 72"102-01-9620 >RR, Aisle Space, 50" , Ultramedic III 1
MATERIALS02-02-0070 RR, Sub floor Materials,1
02-02-0120 RR, Type I & Type III, Interior Materials 102-02-1000 RR, Type I & Type III, Materials 1
03 - MODULE EXTERIOR
UNDERCOATING
03-02-0200 RR, Undercoating Module (STANDARD)1
EXTERIOR MODULE CONSTRUCTION
03-03-0005 RR, Exterior Module Construction Specifications 103-03-1020 U < >Stone Guards, 24" Diamond Plate Corners 1
SR#2022137F
Stone Guards, 24" Diamond Plate Corners, ILOS
Front stone guards only, rear wrapper is standard height.
REFERENCE SR 03-03--SR02 TO COAT FRONT STONE GUARDS WITH
BLACK POLYURIA.
ALL RIVETS USED SHALL BE BLACK RIVETS, NO COATED OR PAINTED
RIVETS.
03-03-1400 >RR, Module Roof Radius, 3" High (STANDARD)103-03-1500 >RR, Extreme Bonding Tape (STANDARD)1
03-03-1600 >RR, Sub-floor Gusset Supports (STANDARD)103-03-1700 >RR, One Piece Side Body Panels (STANDARD)1
03-03-1800 >RR, Reinforce Rear Header (STANDARD)103-03-1900 >RR, Single Sheet Module Roof Sheet (STANDARD)1
DROP SKIRTS03-03-2010 < >RR, Drop Curbside Fwd Body Skirt, 5", Add Double Step, Light Duty Chassis 1
Drop Curbside Forward Body Skirt, Add Double Step ahead of the Curbside
Wheelwell - Drop curbside forward body skirt a total of 5 Inches lower than the
rearward skirt and Incorporate a Double Step in the Side Entry Step well.
Increase the depth of step well inboard as far as sub structure permits. Side
surfaces to be Diamond Plate.
Step surface to be a combination of NFPA Diamond Plate and removable 9"
Grip Strut insert. The second step to be fabricated of NFPA Diamond Plate and
installed so that the step surface is midway between the step well floor surface
and the module floor (Ultramedic, Promedic only)
03-03-2110 >RR, Drop Street side Fwd Body Skirt, 5", Light Duty Chassis 1
FUEL FILLS & SPLASH PLATE03-03-8001 RR, Housing Fuel Fill , Pocket, Round 1
03-03-SR01 U <ALL RIVETS SHALL BE BLACK RIVETS- NOT COATED 1
SR#2022137F
VIII-04
06/13/2023 11:36:02 Page 4
PART NO S DESCRIPTION QTY
ALL RIVETS SHALL BE BLACK, NOT JUST PAINTED OR COATED.
03-03-SR02 U <Apply Black Polyuriathane to the following items 1
SR#2022137F
Apply BLACK Polyuria to the following items:
(2) Full Length Crash Rails - 3" C-Channel
(2) Rear Bumper Cast Pontoons, do not include the grip strut area.
ALL DRIP RAILING ALONG THE TOP AND ABOVE EACH EXTERIOR
COMPARTMENT DOOR.
Rear License Plate Bracket
Rear recessed pocket for tow eyes. Tow eyes to remain chrome.
The OEM front bumper.
(2) Siren speaker housings.
Rear Kick Panel
Front Stone Guards
Cab Running Boards
***NOTE****
The OEM bumper has to be replaced by a primed E450 OEM bumper.
03-03-SR03 U <DRIP RAIL TO BE POLY COATED AND ALL LIGHT FLANGES TO BE BLACK FLANGES OR COATE 1
BLACK LINE - X Drip Rails - Above All lower Doors.
ALL DRIP RAIL TO BE LINE-X COATED AND ALL LIGHT FLANGES TO BE
BLACK FLANGES OR COATED IN
BLACK LINE-X IF BLACK FLANGES NOT
AVAILABLE. This is only to apply black polyurathane to the rails.
03-04-0140 RR, 1 Inch Composite Floor Pan 1
03-04-0160 RR, Composite Floor Material 103-04-1700 RR, Sub-Floor Assembly, Installation 1
03-04-1800 RR, Sub-Floor Assembly, 1/8" PVC 1
MODULE ENTRANCE
03-05-0100 >RR, Module Access, CS Door standard location 103-06-0100 <RR, Entry Doors, Hidden Hinge, Seal on Door ,W/Push Button Fail Safe Latching 1
This includes the Fail Safe Latching mechanisms on all three entrance doors.
03-06-0700 RR, Hold Open Rear Door, Polished Cast Aluminum, Pin & Slot Style 1
03-06-0800 <RR, Hold Open, Curb Side Entry Door, Heavy Duty Gas Spring 1
Curbside Door Restraint - Heavy Duty gas spring hold opens. - Attached by
1/4" x 20 SS Machine Screws with 1/4" x 20 Nut Inserts into Corner Gusset in
Door Side entrance door to open to 90+ degrees. (STANDARD)
03-06-1013 <RR, Entry Door Handles,Trimark Logo Chrome/Black (Interiors Located top of door)1
******************************************************************
Relocate the Standard Interior Side and Rear Entrance Door Paddle Handles
and Lock Boxes to the TOP of the doors.
With Push button Emergency Release top and bottom of each door.
03-06-1059 RR, Safety Walk Grip on Exterior Door Paddle Latches.103-06-14SR U <Black Trimark Handles - Entry and Compartment 1
SR#2022137F
VIII-04
06/13/2023 11:36:02 Page 5
PART NO S DESCRIPTION QTY
ILOS
All compartment and entry doors to be black Tri-Mark handles.
03-06-1700 <RR, Door Lubrication, Paddle Handles and Latches (STANDARD)1
Lubricate all Door Hardware - All paddle handles, latches, rods and springs
shall be lubricated prior to delivery.
03-06-2201 RR , Magnetic Entry Door Switches (STANDARD)1
03-06-2202 RR, Door Panel Mounting Screws (STANDARD)103-06-41SR U <Entrance and Compartment door Diamond Grade Tape 1
SR#2022137F
Add 4" wide red/yellow diamond grade tape to top and entire outside vertical
edge of side entrance door and BOTH rear entrance doors.
Add 4" wide red/yellow diamond grade tape to top and entire outside vertical
edge of all compartment doors.
Mounted on flat aluminum panels then attached to the interior of the doors.
Done by 24/7
***NOTE***
Per 24/7 the last unit had 4" material.
03-06-4200 RR, Coil Cords for Electrical Circuits (STANDARD)103-06-6103 < >RR, Power Door Locks, Module Entry Doors, w/Hidden Switch in Cowl Vent 1
Install power door locks in side and rear entrance doors. Includes (2)
lock/unlock switches, one at side door and one at rear door. Also includes (1)
hidden switch in Cowl vent for unlock function only. System will be tied to OEM
chassis power locks so that both systems operate as one. Does not include
wireless remote.
Cowl vent on the curbside upper to match the same height and location as the
street side exhaust vent.
03-06-8010 RR, Inner Door Panel - Stainless Steel , Two Piece (STANDARD)1
03-06-80SR U < >RR, Lock Boxes, Red/Yellow Diamond Grade Chevron (24/7)1
SR#2022137F-1
Lock boxes to be RED/YELLOW Diamond Grade reflective chevron to match
chevron on perimeter of entry and compartment doors.
SIDE DOOR STEP
03-08-2000 RR, Dual Side Entry Step Well, Increased Depth, Lower Grip, Upper
Diamond Plate 1
03-08-3010 RR, Light, Side Entry Step well, LED, Whelen OS Mini, Clear 1
WINDOWS
03-09-0030 RR, Module Window Requirements 1
WINDOW- Side Entry Door
03-09-1130 RR, Window, Side Entry Door, 18X18, Slider - Limo Tint 1
WINDOW - Rear Entry Doors
03-09-1230 RR, Window, Rear Entry Doors, (2) 18 x 24, Fixed, Limo Tint 2
MODULE TO CHASSIS MOUNTING SYSTEM
03-10-1000 RR, Module to chassis mounting system, Additional Duty Type III (12)103-11-1000 RR, Cab to Module Attachment, Type III 1
REAR BUMPER AND REAR STEP CONSTRUCTION03-12-1800 <RR, Rear Bumper, Recessed 9" Pocket, Flip-up 1
REFERENCE: SR 03-03-SR01 TO COAT REAR DIAMOND PLATE
WRAPPER WITH BLACK LINE -X
ALL RIVETS SHALL BE BLACK, NO PAINTING OR COATING THEM.
VIII-04
06/13/2023 11:36:02 Page 6
PART NO S DESCRIPTION QTY
03-12-3020 < >RR, Bumper Pods, CPI Cast Aluminum w/RR Logo. (UM & UM-150)1
Cast Products Bumper Pods, High Polish Finish. Mounted on the outboard rear
step bumper frame members. The CPI cast aluminum pod shall include a RR
Logo embossed in the cast pattern on the step tread.
03-12-4220 <RR, Pair TecNiq, S330-WC99-1 In Bumper Pocket 1
Install (2) TecNiq S330-WC99-1 (white LED) flush mount marker lights to
illuminate the rear bumper step. Lights shall be located on the inside opposing
faces of the bumper pocket. Lights shall turn ON when the curbside rear entry
door is open.
03-12-5010 RR, Rear Dock Bumpers, Black Rubber, 2.5"H x 16"W 103-12-5600 <RR, Tow Eyes, Rear Chrome with 6" x 6"x 6" Deep Box 1
Mounted to Steel Reinforcement Plate bolted to the OEM Chassis Frame Rails.
Tow Eyes to be Recessed In Rear Kick Panel in cast aluminum box's that are 6"
x 6" x 6" deep. (Ultramedic, Promedic Only)
03-12-SR01 U <'HFD cut into rear Dia. plate wrapper W/ red background 1
SR#2022137F
"HFD" will be cut into the rear diamond Plate wrapper with a red background.
The background will be Ruby Red #680-82 reflective material applied behind
wrapper to show through the 'HFD' lettering.
REFERENCE SR 03-03-SR01 TO COAT REAR DIAMOND PLATE WRAPPER
WITH BLACK POLYURIA- RIVETS SHALL BE BLACK AND NOT COATED OR
PAINTED.
INSULATION
03-13-2220 >RR, Whisper Quiet, Sound Dampening/Thermal Insulation Package (UM )1
ELECTROLYSIS PREVENTION
03-14-4000 <RR, Electrolysis Prevention, Fluid Film 1
Fluid Film is used at Every Point Where the Mounting Process has the
Propensity to Break Paint (STANDARD)
COMBINATION RUB RAIL AND FENDER RING03-15-6500 S < >RR, Rub Rail, Skirt Line, Extruded Anodized 3" C Channel ILO Rubber 1
SR#2022137F
Crash Rail, Extruded Anodized 3" C -Channel to be Black polyurethane coated.
03-15-8200 <RR, Rubber Fender Flare 1
Install black flexible rubber fender flare ILOS fender rings. Fasteners shall be
1/4-20 bolts with fender washers and nylock nuts.
SPLASH GUARDS AND RUNNING BOARDS
03-16-1515 <RR, Running Board w/7" Grip Strut Inserts, E-Series 1
This feature includes a mud flap at the forward end of the running boards to
protect the grip strut insert from wheel splash
REFERENCE SR 03-03-SR01 TO COAT RUNNING BOARDS WITH BLACK
POLYURETHANE COATING..
DO NOT COAT THE GRIP STRUT PORTION OF RUNNING BOARDS.
DIAMOND PLATE PORTION ONLY!
03-16-1800 <RR, Mud Flaps, Rear, Black w/ Road Rescue Logo 1
Heavy Duty Rubber Mud Flaps w/ RR Logo
- Heavy Duty Rubber Mud Flaps to be bolted to the wheel liner behind the rear
duals with 1/4" x 20 Stainless Steel bolts, washer and nylon locknut for ease of
maintenance and repair
(STANDARD)
VIII-04
06/13/2023 11:36:02 Page 7
PART NO S DESCRIPTION QTY
03-17-1000 <RR, Drip Rails 1
Polished Aluminum Drip Rails - Above All Doors, Entry and Compartment
(Standard)
03-18-1000 <RR, Wheel well liners 1
Aluminum Wheelwell Liners - Extending to Bottom of Skirt (Standard)
CAB TO MODULE ACCESS03-19-1111 <RR, Pass Thru Window, ILO Walk Through. Ford & Chevy Cutaway 1
Includes a Lexan sliding window in the module. The window shall have a
positive latch on the cab side.
LICENSE PLATE HOLDER
EXTERIOR COMPARTMENT CONSTRUCTION04-01-00SR U <The #1 #4 #6 #8 and Side Entry door compartments to have stainless steel protect 1
SR#2022137F
20 gauge SS corner protection on rearward vertical door frames on the
following doors. The corner protection to wrap around the outside of the frame
1" and will protect the entire inside portion of the frame. (FULL HEIGHT)
#1 Compartment
#4 Compartment
#6 Compartment
#8 Compartment
Side Entry Door
04-01-0100 RR, Exterior Compartment Construction, Heavy Duty 104-01-3000 <RR, Door Sill Protection, Stainless Steel.1
Door Sill Protection - Install Stainless Steel sill protector on lower edge of all door
frames to prevent paint damage. (STANDARD)
EXTERIOR COMPARTMENT DOORS
04-02-0100 RR, Compartment Door, Hidden Hinge, Seal on Door (UM)104-02-0715 < >RR, Compartment Handles, Exterior, TriMark Logo Chrome/Black (UM)1
TriMark Two-Point Cast w/Polished Chrome Paddle Handle and Housing,
Locking and Non-Locking, with floating cam - Mounted in CNC Cut Opening in
Each Compartment Door Skin w/OEM Clamp Assembly.
(STANDARD ULTRAMEDIC)
04-02-074S U < >RR, Compartment Handle, TriMark Logo Black, Paddle, Street side, locking 3
For single doors or Leading doors on Compartments #1,#2 and #4.
Handles to be black
04-02-075S U < >RR, Compartment Handle, TriMark Logo Black, Paddle, Street side, Non-Lock 1
For Trailing doors on the street side.
Handle to be black
Compartment #2
04-02-076S U < >RR, Compartment Handle, TriMark Logo Black, Paddle, Curbside, locking 2
For single doors or Leading doors on the curbside
Handles to be black
VIII-04
06/13/2023 11:36:02 Page 8
PART NO S DESCRIPTION QTY
Compartments #6 & #8
04-02-077S U <Compartment Handle, TriMark 2015 Black/Black,Drop Dooror Drawer,
Locking 1
Handle to be black.
Compt #8.5
04-02-0850 <RR, Compartment Door Locks, 2015 TriMark 1
Compartment Door Handle Manual Locks. - All doors shall incorporate doublecut, non-directional tumbler assemblies that are keyed alike (STANDARD)
04-02-0900 RR, Compartment Rotary Latches 104-02-1000 RR, Compartment Door Nader Pin 1
04-02-1200 RR, Compartment Door Lubrication, Door Handles and Latches 104-02-1300 RR, Compartment Door Reflectors 1
04-02-1500 RR, Compartment Door Switches, Magnetic 104-02-2010 RR, Compartment Door Panel, Inner, Diamond Plate 1
04-02-2500 RR, Compartment Door, Panel Mounting Screws 104-02-5999 >RR, Power Door Locks, Exterior Compartments 1
04-02-6010 RR, Exterior Compartment #'s 1, 2, 4, 6 & 8, Only 104-02-7801 RR, Compartment Door, Gas Struts 1
04-03-2400 < >RR, All Standard Compartment Lights, LED, Flexible Strip 1
Two (2) Vertical strips in each exterior compartment installed, one (1) on each
side of the opening. The compartment #1 lights will be also wired to Oxygen
light switch in action area.
EXTERIOR COMPARTMENT INTERIOR
04-04-1000 <RR, Exterior Compartment, Interior Finish, Polyurethane Coated 1
Exterior Compartment Interior Polyurethane Rubberized Liner Color Choice.
Rubberized polyurethane coating applied to the surfaces of ALL exterior
compartment walls and dividers. Does not include slide out battery tray or
mounting angles. Battery Tray to be raw aluminum.
NOTE: If there is not a slide out battery compartment in the order the #8.5
exterior compartment area will be Polyurethane lined.
04-04-1003 RR, Color, Black 104-04-1500 S < >RR, Exterior Compartment, Finish Carpeted Walls, (Per Comp)1
SR#2021429F
Carpeted Exterior Compartment Walls Carpet exterior compartment walls and
top in lieu of standard polyurethane coating. Floor to remain .125 Alum. with
black rubber matting.
COMPARTMENT #1. THIS INCLUDES SHELVES AND DIVIDERS.
EXTERIOR COMPARTMENT SHELVING
04-05-0001 <RR, Exterior Compartment Shelving and Unistrut 1
All exterior shelving Unistrut shall be welded to the walls prior to any
compartment wall finish. Where specified, exterior adjustable shelves shall be
box pan formed of a minimum .125 inch Aluminum Diamond Plate and corners
shall be welded. Shelves shall be infinitely adjustable, and securely mounted to
heavy gauge aluminum Unistrut track. (Standard)
04-05-1000 <RR, Compartment Shelving, Diamond Plate 1
Diamond Plate Exterior Compartment Shelving. (STANDARD)
COMPARTMENT #1 - STREETSIDE FWD04-06-0001 RR, Compartment #1, EXTERIOR 1
VIII-04
06/13/2023 11:36:02 Page 9
PART NO S DESCRIPTION QTY
04-06-0010 <RR, Compartment #1, Electrical Storage 1
#1 Compartment Electrical Storage - Recessed into the bulkhead side of
compartment #1 shall be an enclosed area for the installation of miscellaneous
electrical components. The aluminum cover for this area to be installed with 'J'
molding The 'J' molding to be full length of panel on bottom and inboard side.
Outboard side of panel to be secured with mechanical fasteners. (STANDARD)
04-06-0020 RR, Compartment #1, Full Height, Standard Configuration (UM)104-06-1510 <RR, Compartment #1, Shelf, Adjustable, First shelf 1
Adjustable removable shelf for #1 exterior compartment.
Divider to Wall #3.
04-06-1701 <RR, Compartment #1, Divider, Fixed 1
MOVE DIVIDER REARWARD AS CLOSE AS POSSIBLE TO WALL #3 IN
ORDER MAXIMIZE FORWARD OF DIVIDER BACKBOARD SPACE.
WILL INCLUDE CARPETING PER 04-04-1500.
04-06-1901 U <RR, Compartment #1, Dividers Adjustable (2) Backboard Storage 1
SR2022137F
Location: Forward portion of Compartment #1, forward of vertical divider to hold
backboards.
04-06-1929 U <(2) Cushions on Backwall forward of vertical divider for Backboards 1
SR2022137F
Location: Back wall, forward of vertical divider there shall be (2) two.
04-06-1935 < >RR, Compartment #1, Strap, equipment, Seat belt Style, Metal Buckle,
Each 1
There shall be (1) equipment restraint strap with quick release buckle provided
in this compartment.
Must pick quantity if more than one is needed.
State Location: Forward of vertical divider , half way up from floor to hold
Backboards in place. Wall #1 to Vertical divider.
COMPARTMENT #2 - STREETSIDE FWD WHEELWELL
04-07-0010 RR, Compartment #2, EXTERIOR 104-07-26SR U <Custom -Fixed Shelf 10" deep located 3" Up from floor with 2" lip 1
SR#2022137F
Custom "Fixed Shelf" that shall be 10" deep only with a 2" lip that shall be
located 3" up height wise from the floor to aide in clearing door Nader pins when
removing or placing Stair Chair.
COMPARTMENT #4 - STREETSIDE AFT
04-09-0001 RR, Compartment #4, EXTERIOR 104-09-3000 <RR, Compartment #4, 3/4 Height, Standard Configuration 1
#4 Compartment street side rear of module with Interior Upper left #4 Cabinet -
#4 Compartment to be to the bottom of upper left #4 cabinet.
04-09-4500 >RR, Compartment #4, Delete Standard Adjustable Shelf 1
04-09-SR00 U <Shelf Adjustable , Compartment #4, ILOS 1
SR#2022137F
Shelf is to be adjustable from ceiling down approx. 14 inches. Shelf is to be 16
inches deep. The (2) inboard shelf track to be full height and located to
accommodate option (04-09-SR02)
VIII-04
06/13/2023 11:36:02 Page 10
PART NO S DESCRIPTION QTY
04-09-SR02 U <Install (2) 4 inch wide .250 inch aluminum plates with mounting flange 1
SR#2022137F
The #4 exterior compartment. Install (2) 4 inch wide .250 inch aluminum plates
with mounting flanges, full width, to secure to the inboard shelf track. Plates to
have a DA finish. Allow space from the back of plate to the back wall for
fasteners.
NOTE: Plates to be utilized for the customer installed SCBA brackets.
NOTE: GLOVE BUTLER RECESSES INTO COMPARTMENT #4 AND WILL
REQUIRE SOME MODIFICATION IN ORDER TO LOCATE UNISTRUTS ON
BACK WALL FOR ATTACHING THE (2) .250 ALUMINUM PLATES FOR SCBA
BRACKETS.
Reference unit 589980
COMPARTMENT #6 - CURBSIDE AFT04-11-0084 RR, Compartment #6, EXTERIOR 1
04-11-00SR U <Compartment #6, 3/4 Height to Match Height of Compartment #4 and
Increased Depth 1
SR#2022137F
3/4 Height Compartment #6 curb side rear of module with Interior Upper right
U6 Cabinet - Compartment #6 to be to the bottom of upper left #6 cabinet.
This compartment will also be increased in depth by 2". The compartment will
also be increased by 4" in width.
SEE CA DRAWINGS.
***NOTE***
This does not include the U6 cabinet.
04-11-0600 RR, Compartment #6, Standard Configuration (UM)1
04-11-45SR U <Shelf Adjustable - Compartment #6 1
SR#2021429F
(1) ADJUSTABLE DIAMOND PLATE SHELF FOR EXTERIOR
COMPARTMENT #6.
NOTE: SHELF TO BE FULL WIDTH OF COMPARTMENT.
04-11-SR06 U <Install (2) 4 inch wide .250 inch aluminum plates with mounting flange 1
SR#2022137F
In the #6 exterior compartment, install (2) 4 inch wide .250 inch aluminum plates
with mounting flanges, full width, to secure to the inboard shelf track. Plates to
have a DA finish. Allow space from the back of plate to the back wall for
fasteners.
***NOTE***
Plates to be utilized for the customer installed SCBA brackets.
Reference unit 589980
RR, Compartment #8, EXTERIOR04-14-1400 RR, Compartment #8, Full Height Door 1
VIII-04
06/13/2023 11:36:02 Page 11
PART NO S DESCRIPTION QTY
COMPARTMENT #8.5 - CURBSIDE LOWER FORWARD
RR, Compartment #8.5, EXTERIOR04-15-0400 <RR, Compartment #8.5, Drawer Style Battery Box Configuration 1
Battery access door mounted slide out battery tray. The interior of the battery
compartment to be made of POLYURETHANE COATED ALUMINUM. Battery
Tray to be raw aluminum.
<INTERIOR TRIM AND FEATURES
New Interior Trim - All cabinet and wall panel aluminum trim to be Gray
anodized. (No Black trim to be used). All protective corner trim will be Opaque
and will include a matching domed end cap. (STANDARD)
INTERIOR ADJUSTABLE SHELVES
INTERIOR TRIM05-05-2000 >RR, Interior Trim, Stainless Steel Corner Trim, Brushed 1
HEADLINER05-06-1100 RR-Ceiling Medical Device Rail (UM & UM-150)1
05-06-1210 RR, Headliner, Vinyl Ceiling, No Seams (UM & UM-150)105-06-1802 RR, Ceiling Medical Device Rail. White LED Strip Lights,(UM & UM-150)1
05-06-1902 RR, Ceiling Medical Device Rail, Red/Amber LED Turn/Brake Strip Lights
(UM & UM-1
FLOORING05-07-1000 RR, Flooring, Aluminum Floor/Wall Cove Molding (STANDARD)1
05-07-1400 RR, Flooring, Stainless Steel Rear Threshold, 45 Degree Chamfered
(STANDARD)1
05-07-5000 RR, Flooring, Loncoin II Flecks Choice 105-07-5001 RR, Color - 150 Onyx 1
05-07-9895 RR, Floor, Curbside Stainless Steel Threshold, 4"wide,Safety Walk
Anti-Skid Tap 1
HEAD BUMPERS
BACKRESTSRear Entry Door Grab Handles05-10-1302 <RR, Rear Entry Door Grab Handles, "L" Bars, 16" Anti-Microbial, Yellow 1
"L" Bars - 16" Anti-Microbial Yellow. 1.25" Diameter stainless steel "L" Bars
mounted to each rear door. Approximately 16" wide by 26" high. Yellow
Anti-Microbial finish.
Side Entry Door Grab Handle05-10-1402 <RR, Side Entry Door Grab Handle, "L" Bar - 19" Anti-Microbial Yellow 1
"L" Bar - 19" Anti-Microbial. 1.25" Diameter stainless steel "L" Bars mounted to
side entry door. Approximately 19" wide by 24" high. Yellow Anti-Microbial
finish.
05-10-2102 RR, Ceiling Grab Rail, Streetside72" Anti-Microbial Yellow 105-10-2202 RR, Ceiling Grab Rail, Curbside over Squad Bench 72" Anti-Microbial Yellow 1
IV FLUID HANGERS
05-11-4000 RR, IV Hangers, CPI #IV2008 (STANDARD)105-11-4004 <RR, IV Hangers, Quantity (4)1
SEE CA DRAWINGS FOR LOCATIONS OF THE (4) HANGERS.
LEFT STACK AND BULKHEAD AREA #1
05-12-0010 RR, Interior Street side #1 - Left Stack and Bulkhead 105-12-0250 < >RR, Left Stack, Storage Area #1 (Ultramedic)1
Left Stack Radio/Inverter cabinet to include (1) adjustable shelf in upper section.
Both sections shall have double solid aluminum, Kydex Thermoplastic or
multi-spec (picked in the proper section of work order) covered doors with
locking latches on the upper doors and locking latches on the lower doors.
The doors will be aisle facing.
See CA drawings
VIII-04
06/13/2023 11:36:02 Page 12
PART NO S DESCRIPTION QTY
05-12-02SR U < >Custom Countertop on the Left Stack 1
SR#2022137FRR, Left Stack, Storage Area #1 (Ultramedic) Left Stack Radio/Inverter cabinet
to include (1) adjustable shelf in
upper section. Both sections shall have double
solid aluminum, Kydex Thermoplastic or multi-spec (picked in the proper section
of work order) covered doors
with locking Latch on the upper doors and locking latch on the lower doors.
Must use M1 latches for
ON TOP OF LEFT STACK WILL BE AN AVONITE BLACK ICE K-3-7100
COUNTER TOP TO MATCH THE ACTION AREA COUNTER TOP AND ALL
OTHERS.
COUNTER TOPS TO HAVE NO RETAINING LIPS AND RE-ENFORCED FOR
MOUNTING A MEDI-VAULT TO THE TOP OF THE COUNTER TOP.
SEE CA DRAWINGS.
05-12-SR01 U <Custom Upper Bulkhead Cabinet with Double Doors 1
SR#2022137F
Custom Upper Bulkhead Cabinet Double Doors-
The cabinet will have two solid hinged aluminum doors (covered in
thermoplastic to match the other cabinets) and a locking latch on each door.
The left hand door will be approx. 7.44" Wide and the right hand door will be the
remaining width. There will be NO center mullion and the left door will be
reduced in width due to the Knox Med-Vault on top of the left stack.
See SR#2020302F for Reference
ACTION WALL AREA #205-13-0010 RR - INTERIOR STREETSIDE #2 - ACTION AREA 1
05-13-0700 RR, Action Wall Area #2, Medical Device Rail 105-13-07SR U <RR, Cabinets, Upper Left U2 and U2.5, Std Configuration (UM), CN 10 Certified 1
SR#2022137F
(1) U2 Cabinet over Action Area shall have DOUBLE GEN II OHO doors, so as
to not hit the back of the Attendant Seat when opened.
The U2 shall be 18" wide, per CA drawings. The forward UL #2 and the
rearward UL #2.5 cabinets to include (1) adjustable shelf in each cabinet. The
attendant switch panel and environmental controls to be built into a separate 6"
high section below the Upper Left #2.5 cabinet and tilted slightly down for ease
of accessibility to the attendant..
05-13-08SR U <Install rear switch panel face plate with machine screws 1
SR#2022137F
Install rear switch panel face plate with machine screws.
05-13-2200 < >RR Countertop, Forward and Rear Monitor Area.1
Counter Top aft of CPR Seat to be 16" W.
Avonite Black Ice, K3-7100
05-13-2203 RR, Avonite Black Ice, K3-7100 1
VIII-04
06/13/2023 11:36:02 Page 13
PART NO S DESCRIPTION QTY
RR-Interior Street side #3 - CPR Seat
05-14-05SR U <RR, CPR Seat, Streetside - 33" Wide ILOS 1
SR#2022137F
The CPR seat shall include a flip up seat equipped with a gas strut hold open
device and positive latch for securing the lid when closed. The CPR seat shall
include a 2" foam seat and backrest, the upper and lower sections will be
padded on both sides for added protection.
CPR SEAT TO BE EXTENDED TO 33" WIDE, PER CA DRAWINGS.
05-14-0900 <RR, CPR Seat Lid Hold-Down 1
CPR Seat Lid Hold-down - Install a Black Tri Mark recessed paddle latch,
Include a tri-mark retention mounting bracket (1) under CPR seat lid.
05-14-12SR U < >RR, Cabinet, Upper Left U3, 9"H x 33"W, 72" HR w/ Gen II OHO Latch 1
SR#2022137F
Upper left #3 Cabinet with 3/8" Lexan lift up door with GEN II (OHO) Latches.
Does not include shelf. Cabinet to be approximately 9"H x 10-3/4" D x 33"W.
Reduce the height of the CPR seat to 15" from floor and the bottom of seat
cushion. The cushion on the under side of #3 cabinet to utilize 1/2" foam. The
distance between top of the CPR seat and bottom of the cabinet cushion to be
a minimum of 43" in compliance with KKK-A-1822F. NOTE: Requires 72"
headroom.
Gen II OHO restocking door.
05-14-1400 RR, CPR Seat, Move Forward 12"1
05-14-2560 <RR, CPR Seat, Seat Belt, 4 Point (Per4Max) Black, Change Notice 8-
Compliant 1
Above Lid mounted
05-14-3906 S <RR, CPR Seat, "U" Barrier Bar, Padded, 1.5" SS, Black 1
Mounted at the front of the CPR side seat vertically in line with the Padded head
cushion on the "U2" cabinets.
RR, INTERIOR STREETSIDE #4 - REAR AREA
05-15-1001 <RR, Cabinet, Upper Left U4, Standard Configuration- CN 10 Certified 1
Upper left U4 cabinet with sliding poly carbonate doors with spring loaded
latching handles, restocking feature with spring loaded exterior integral latch
and (1) adjustable shelf.
05-15-10SR U <Forward Facing Wall of Interior of Compartment #4 with Double Intraxx 2
SR#2022137F
There shall be two sections, one above the other of Intraxx with end caps on all
four ends. Forward facing compartment #4 wall to be reinforced for two Intraxx
sections running parallel to each other.
From the counter to the bottom edge of the lower Intraxx rail shall be just above
the counter top retaining lip. The Intraxx rail will be from the aisle edge to the
cabinet wall.This piece will be used to mount a Zoll X mount arm (future
installed).
The top rail to will be full width (from aisle edge to the back wall). Above the top
rail will be approx 2" of clearance between the rail and the underside of the U4
cabinet.
CHANGE from unit 589980!!!!
VIII-04
06/13/2023 11:36:02 Page 14
PART NO S DESCRIPTION QTY
05-15-4700 S < >RR, Countertop, 16" wide aft of the CPR Seat 1
COUNTER TO BE REDUCED TO 16 INCHES WIDE
Counter aft of CPR seat to be 16 inches wide.
SQUAD BENCH AREA
05-16-0010 RR, INTERIOR CABINETS - SQUAD BENCH AREA 105-16-0144 RR, Squad Bench, Curbside, Two Piece Hinged Lid 1
05-16-0150 RR, Squad Bench, Restraint Belts 105-16-0151 RR, Squad Bench, Medical Device Rail 1
05-16-0152 <RR, Squad Bench, Latches, Lids, Tri Mark,1
Include a tri-mark retention mounting brackets
05-16-0158 <RR, Squad Bench, Seat Belts, Two 4-Point belts (Per4Max) Black, CN-8 1
Above the Lid Mounted
05-16-1323 <RR, Head of Squad Bench, Storage, Recessed (2) O2 Brackets, Open 1
There shall be a recessed cabinet for (2) F. W. #521 portable oxygen bottle
brackets at the forward end of squad bench. The cabinet shall be located to the
left of the side entry door step well and below the squad bench lid. The cabinet
shall be open access with no doors.
05-16-8410 < >RR, Upper Squad Bench, Cabinet, 9"H, 72" HR, GEN III OHO 1
There shall be a cabinet located above the squad bench. The cabinet will be
approximately 9"H x 8-1/2"D and will be the same length as the squad bench.
The cabinet shall be divided into two (2) separate sections by a fixed center
divider. Each section will have GEN III lift up doors with restocking feature. Does
not include shelves. The distance between the top of the squad bench cushion
to the bottom of the cabinet cushion shall be a minimum of 43" in compliance
with KKK-A-1822F requirements for head clearance.
GEN III OHO Restocking Doors
05-16-9915 <KKK Compliancy Regarding Overhead Cabinetry 1
The inclusion of a cabinet over the squad bench or CPR seat on a unit with less
than 72" headroom will result in the unit not meeting KKK specification
requirements. The end user has been informed of the KKK requirements and
this cabinet has been added at the request of, and according to the
specifications of, the end user.
05-16-SR00 U <U6 Cabinet to match U4 cabinet with sliding doors 1
SR#2022137F
U6 interior cabinet to match U4 with sliding doors with a restocking feature and
(1) adjustable shelf inside.
Will be aisle facing, see CA drawings
BIOHAZARD-
RR, INTERIOR - BIOHAZARD05-17-0205 <RR, Squad Bench "A" Bar 16", Anti-Microbial, Waste/Sharps, Yellow 1
Waste on top, sharps on bottom.
05-17-2000 >RR, Glove Butler(s)105-17-2100 < >RR, Glove Butler (3) Total, Over Curbside Entry, Drop down Door 1
(3) Glove Butler II glove boxes installed above the side module entrance door
inside a cabinet with drop down door and (2) locking latches. Door to be Kydex
Thermoplastic or multi-spec covered and bottom hinged to tip out for
restocking. Access holes to be cut in door for glove removal.
Must use M1 latches for CN 10 certification
VIII-04
06/13/2023 11:36:02 Page 15
PART NO S DESCRIPTION QTY
05-17-2320 < >RR, Glove Butler (3) Total, Lower Left Below Counter, Recessed in Drop Down 1
(3) Glove Butler II glove boxes installed on the action wall inside a cabinet withdrop down door for restocking. Access door to have a locking latch. Access
holes to be cut in door for glove removal.
Must use M1 latches for CN 10 certification
CURBSIDE RIGHT STACK STORAGE #8
05-18-0010 RR, INTERIOR CURBSIDE - RIGHT STACK STORAGE #8 105-18-0600 S <RR, RF ALS, Upper Heater, A/C Unit, Standard Configuration (UM & UM-150)1
Change black plastic vent on face of right stack to stainless and relocate to isle
side of right stack. This will
require making the isle side vent larger. (THERE WILL BE NO VENT ON FACE
OF RIGHT STACK).
05-18-0800 <RR, RF ALS, Hidden Air Intake (STANDARD)1
Change black plastic vent on face of right stack to stainless and relocate to isle
side of right stack. This will
require making the isle side vent larger. (THERE WILL BE NO VENT ON FACE
OF RIGHT STACK).
05-18-10SR U <Custom Right Stack with U8 half and L8 half, with belted straps 1
SR#2022137F
The right stack will have TWO open cabinets (U8 and L8) with a floor dividing
the two halves that will have a net over the openings of both the U8 and L8.
Each half (U8 and L8 to have (1) each adjustable shelf= (2) total 14 ga. SS
shelves)
Webbed restraints both vertical & horizontal. The horizontal straps shall have
seat belt style buckles (6 total/3 per half) in for easy access, and their shall be
(4) straps vertically in each half. This is ILO the standard ALS doors and the
drug door.
These cabinets will have interior and exterior access. The cabinets will be lined
with flooring material. Each cabinet will have a sweep out floor.
Change black plastic vent on face of right stack to stainless and relocate to isle
side of right stack. This will
require making the isle side vent larger. (THERE WILL BE NO VENT ON FACE
OF RIGHT STACK).
ATTENDANT SEAT
05-19-0500 >RR, Attendant's Seat, EVS 1880, Child safety, Comfort, Per4Max Belt-Black 105-19-0505 RR, Color - Black 1
05-19-6501 RR, Attendant's Seat Base, EVS Swivel 2 Pos 1
RR-INTERIOR COLORS
05-20-2000 RR, Multi-Spec Interior Surfaces 105-20-2001 RR, Color, Misty Gray #6028 1
05-20-5300 <RR, Upper Band Vinyl Color, Cabinets and Stitched Cushions 1
Upper Band Vinyl Color Choice for cabinets and stitched cushions.
05-20-5312 RR, Color, Black DA300 1
05-20-5500 RR, Lower Band Vinyl Color, Vacuum Formed Cushions 105-20-5512 RR, Color, Black DA300 1
05-20-9850 RR, Poly carbonate Color Choice 105-20-9852 <RR, Poly carbonate, Clear 1
1/4" poly carbonate
RR-MISC. INTERIOR OPTIONS05-21-4200 RR, Interior Cabinet Lights, Kinequip LED Strip, BLUE 1
VIII-04
06/13/2023 11:36:02 Page 16
PART NO S DESCRIPTION QTY
05-21-4250 <RR, Upper & Lower Left Cabinets, Define Locations 1
U2, U2.5, U3 ,U4 , C1 , L1, U7, U7.5,U6, U8, L8.
Total of 11 cabinets
05-21-5004 RR, Squad Bench & Lower Left, Full Height Brushed Stainless Kick panels 1
05-21-8500 RR, Cabinet Latch, Southco 2" Round, Stainless Locking, CN 10-Rated
10lb 9
05-21-8800 <RR, Cabinet Latch, Southco Lever Latch, Chrome Non-Locking, CN
10-Rated 5lb 1
(1) for the glove box at the center console.
06-01-0100 RR, General Wiring, General Harness 1
CAMERAS06-06-1200 < >RR, Camera System, Exterior Back-Up, Over Rear Doors, Includes LCD Monitor 1
Install one (1) Audiovox, ASA Voyager VCMS-24
color camera with Voyager LCD monitor.
RR-COMMUNICATION06-06-1601 RR, Two Way Radio Routing Path Cab to Module (STANDARD)1
06-06-1700 <RR, Two Way Radio Pre wire, 12VDC Power & Ground (STANDARD)1
#8 gauge Red power and Black ground wiring will be labeled appropriately for
future installation by a radio technician. The Black ground wire to be connected
to a main ground point, the Red power wire to be left unconnected near a direct
to battery connection point inside the power distribution cabinet. Both wires to
route to the lower section of the Left Stack/Radio Cabinet and be of sufficient
length to allow routing to the Cab Console as an alternate radio installation
location. Wires to be labeled at both ends.
06-06-1900 <RR, Antenna UHF/VHF, (2) Pre wire,1
relocate (1) standard antenna lead, antenna to route from lower bulkhead
cabinet to driver side of coolbar for a customer / dealer installed antenna.
This will be used for a pull wire for when the dealer installs the customer
supplied GPS / Quad Antenna at their location.
No connections to be made.
Route cables to route thru 1" hole with grommet in the street side of cool bar
thru module.
(1) RG58AU low loss cables installed from the two-way radio cabinet to the
ceiling of the module. Accessible be removing an interior light in the patient
compartment ceiling. The interior light shall include an etched plastic label
identifying the plate as the antenna access point. The cable shall route from the
module roof to the lower section of the left stack/radio cabinet and be of
sufficient length to allow routing to the cab console as an alternate radio
installation location.
Total of (2) antenna pre wires.
06-06-3001 < >RR, Antenna UHF/VHF, (1) Base and Cable 1
(1) radio antenna base mounted to driver side of cool-bar.
No connections to be made.
The cables to route thru 1" hole with grommet in the street side of cool bar thru
module.
06-06-SR00 U <PRE-WIRE FOR MOTOROLA XLT 2500 SERIES RADIO WITH DUAL
REMOTE HEADS.1
VIII-04
06/13/2023 11:36:02 Page 17
PART NO S DESCRIPTION QTY
SR#2022137F
INSTALL (1) MOTOROLA HKN6168B DATA CABLE (1) MOTOROLA
HKN6188B POWER CABLE FROM CENTER OF OEM DASH, ALLOW
EXTRA CABLE TO EXIT OUT TOP OF DASH AT OEM TRAY AREA WHERE
RADIO WILL BE MOUNTED. TO L1 LOWER BULKHEAD CABINET. INSTALL
(1) MOTOROLA HKN6168B DATA CABLE AND (1) HKN6188
POWER CABLE FROM BEHIND REAR SWITCH PANEL FACEPLATE TO L1
LOWER BULKHEAD CABINET.
INSTALL (1) MOTOROLA HKN4191B TRANCEIVER POWER CABLE IN L1
LOWER BULKHEAD CABINET TO POWER DISTRIBUTION CABINET.
ALL POWER CONNECTIONS TO BE MADE FOR REMOTE HEADS AND
TRANSCEIVER,
NOTE ALL POWER LEADS WILL BE DIRECT TO BATTERY INCLUDING THE
RED AND YELLOW FROM THE HEADS AND THE RED FROM THE
TRANSCIEVER.
LEAVE SERVICE LOOP ON CABLES TERMINATING IN FRONT DASH AND
REAR SWITCH PANEL FACEPLATE FOR SERVICING RADIOS.
INSTALL (1) SPEAKER WIRE FROM OEM DASH TO HEADLINER
CENTERED WITH PASS-THRU.
06-06-SR01 U <All antenna cable to be routed in 3/8 in. autoflex.1
SR#2022137F
All Antenna cables to be routed in a 3/8" autoflex (Metal Flexible Conduit) and
will terminate in L1 cabinet.
NOTE: ANTENNA ENDS TERMINATING IN L1 CABINET TO HAVE
AUTOFLEX TERMINATING 4" INTO THE CABINET, THE REMAINING
ANTENNA CABLE IN L1 WILL NOT HAVE AUTOFLEX. THIS WILL PREVENT
CUTTING INTO THE ANTENNA CABLE DURING FINAL RADIO
CONNECTIONS.
06-06-SR03 U <Add switch function to front and rear V-Mux panels 1
SR#2022137F
Add switch function to front and rear V-Mux panel that will energize 12VDC
output wire coiled in the power dist. housing for 8 seconds and then will turn off.
Switches to labeled "Cradle Point reset"
REVO electrical engineering to determine final design.
BOTH FRONT AND REAR PANELS TO HAVE THIS OPTION.
06-06-SR04 U <Sentinel 300 AIR AND SURFACE SANITIZING SYSTEM 1
SR#2022137F
Mount on action wall, see photos and change drawings.
RADIO AND CLOCKS06-07-6000 RR, Clock, Digital DDS 12/24 Hour 2.5" LED, Over Rear Doors 1
07 - ELECTRICAL 12 VOLT DC07-00-0100 RR, Electrical System 12V, Multiplex System, Type 3 (UM,UM-150)1
07-01-0010 <RR, Crct Pwr Accs.,Ign/Shrline,1-20 amp 12VDC to 2 locs,W/O,PD9130
chrgr 1
(1) 10 amp lead shall be coiled up behind the A./A panel for future use.
VIII-04
06/13/2023 11:36:02 Page 18
PART NO S DESCRIPTION QTY
(1) 10 amp lead shall be coiled up behind the drivers seat in the cab, for future
use.
Note: This code will be used when and additional battery charger has already
been installed, the PD9130 will not be used with this option.
07-02-1000 RR, Voltmeter - Standard 1
07-02-1100 RR, Alarm,Low Voltage,With Buzzer and Indicator,in cab console 107-03-2000 RR, Ammeter - for multiplex system 1
BATTERY SYSTEM07-04-5305 RR, Ignition Battery Shut off Timer, 5 minute,1
07-05-0100 <RR, Batteries, Type 3 UM/UM-150, Chevy or Ford (1) OEM, (2) 700 CCA in
8.5 1
Include (2) 700CCA - AC Delco 1150 Maintenance Free
Batteries stored in the curbside lower #8.5 drawer style compartment. (1) OEM
battery under the hood.
07-07-0500 RR, Module Disconnect, Multiplex System 1
07-08-0100 RR-Battery Ground 107-09-6100 RR, Battery Charger Included with Inverter - See Inverter Picked.1
07-10-1000 <RR, Power Outlets 12V, (2) Power Point Style, On with Ignition 1
(1) outlet shall be mounted in the action area medical rail.
(1) outlet shall be mounted above the top shelf in cabinet L8
07-10-5302 <RR, (2) Additional 12V Outlets, Direct to Battery 1
(1) in #4 Compartment Wall 3 above shelf.
(1) in #6 Compartment Wall 1 above shelf.
07-10-530S U <(1) Additional 12V Surface Mount Outlet, Direct to Battery 1
SR#2022137F
C1 cabinet for customer installed drug vault.
Will go above the shelf in the C1 cabinet.
***NOTE***
This outlet will be in a junction box / surface mount due to the clearance behind
the wall.
07-10-7230 <RR, Power Outlet, Kussmaul, USB Dual Port, 5VDC, 4.8 Amp, 091-219-5 4
Located in the cab switch panel per Electrical Engineering
ignition hot standard
*MOUNTED ON THE CENTER CONSOLE (2) DUAL USB OUTLETS (SEE
DRAWINGS) USB'S TO BE WIRED DIRECT TO BATTERY.
*MOUNTED IN THE ACTION AREA (2) DUAL USB OUTLETS TO BE WIRED
DIRECT TO BATTERY.
07-10-72SR U <Port, Cable, and Dust Cap for Center Console VMUX Display 1
SR#2022137F
This option provides a port, cable, and a dust cap due to the center console
VMUX display being mounted recessed into the console panel with no VMUX
bezel.
Reference 246974 Ashland
VIII-04
06/13/2023 11:36:02 Page 19
PART NO S DESCRIPTION QTY
FRONT CONSOLE
08-01-31SR U <Driver's Switch Panel/Radio Console - VMUX, Custom 1
SR#2022137F
Driver's Switch Panel/Radio Console - VMUX, Custom
Console to be light gray polyurethane coated.
Cup holder configuration in front console to be the same
as unit #489582. The 4.125 holes to be located inboard and the 3.25 holes to
be located outboard. The cup holder bottom to be part of the console design at
2.75"" deep. A riser is not acceptable.
Custom Console to be Fabricated out of .125 aluminum.
Custom Aluminum Floor Console for Multiple Components
Floor Mounted Console for Switch Panel, Siren and
Components.
Top Forward portion of console on drivers side to have an
angled mounting surface to recess mount the VMUX
Display. To be angled to face the driver.
Below the VMUX will be the siren and the (3) position switch panel.
To the right of the angled section will be a flat reinforced computer mounting
area. Below the computer mounting area will be an angled section (to the rear)
that will have (2) USB ports. Below the USB ports will be a 3" deep storage
pocket.
The space right of the dog leg is to have a flat surface
that is reinforced for laptop mount, just rear of that is to
have an angled portion that is to be a maximized
recessed storage pocket that will be a minimum of 4.00"
in depth, do not include a riser.
The cup holder section is to step down below the USB and storage pocket
section and is to accommodate a removable cup holder inset that is removable
for cleaning. (2) Holes for cup holders are to be large enough to accommodate
a 32 oz. Gatorade bottle. (2) holes to be smaller. Depth of cup holders should
not exceed 2.75" See CA Drawing.
The recessed pocket is to be fully sealed prior to having
polyurethane liner applied. Add a support bracket to the
inside of the console to brace the forward side of the
console. (This bracket is to be in the same position as
the other EEV or Hennepin builds.)
Secure an additional rear section to the rear of the main
console that will be designed in a similar angle and
dimensions as previous Hennepin units but will store (2) boxes of gloves. This
will require and angled false floor so that the glove boxes are near the lift up
door. The inside of this area is to be sealed and have polyurethane liner applied.
Glove box area is to be welded in and coated to match and it will hold the boxes
of gloves in position of the oval slot cutouts. To include a bottom hinged solid
door with a chrome lever latch and oval slots cut to access gloves.
NOTE: THE GLOVE SECTION TO MATCH Hennepin unit.
OBSERVE:
Install so the pan does NOT hit the OEM doghouse
gasket.
NOTE: (This note is the same as unit #489582)
OVERALL CONSOLE HEIGHT DECREASED BY 1 1/2"
VIII-04
06/13/2023 11:36:03 Page 20
PART NO S DESCRIPTION QTY
TO ALLOW CONSOLE TO SLIDE UNDER OEM ARM
REST TO ALLOW FOR 13" SLIDE TRAVEL. SEE
UPDATED DRAWINGS. ALSO NOTE THE CONSOLE
SLIDE PLATE MUST BE THROUGH BOLTED TO THE
CAB FLOOR.
Face Plates are to be laminated with Graphite Formica and
secured with machine screws and nutzerts.
08-01-4250 <RR, 3 Position Multi-Plex Switch Panel Cab Console 1
Provide a (3) button multiplex switch panel on the center console.
These switches shall operate the following:
Left Switch: Momentary Left Flood
Center Switch: Momentary Front Flood
Right Switch: Momentary Right Flood
08-02-115S U <Touch Screen in console panel - Recessed mounted 1
SR#2022137F
The touch screen will be recessed mounted into the console panel and will not
utilize the bezel.
ATTENDANT CONTROL PANEL08-03-1150 RR, Attendant's Control Panel V-MUX, Touch Screen, w/bezel & USB Programming Por 1
08-04-6002 S <RR, Power Distribution, Weldon V-MUX, Video Inputs (UM & UM-150)1
Weldon V-Mux Multiplex System w/7" LCD VGA
Touch Screen on front and rear switch panels with
V-Mux Nodes. Includes an O2 Regulator/Transducer
Mounted in #1 Compartment.
INCLUDES VIDEO INPUTS FOR BACK-UP
CAMERA.
NOTE: The battery shut-off circuit to remain on for 5
minutes after the ignition has been shut off.
Shutting off the ignition will activate a timer that will
leave the batteries on for five minutes so that the
module dome lights can be left on for patient
unloading/vehicle restocking.
Clock - Digital, Rear Control Panel, V-Mux display
Electrical System 12V - V-MUX Multiplex System.
Voltmeter - Standard for V-Mux
Alarm, Low Voltage. Console, V-MUX Ammeter - for
MULTIPLEX ELECTRIC SYSTEM. V-MUX Module
Disconnect - V-Mux Multiplex Electrical System
09 - EMERGENCY Systems- Sirens, Speakers and Air Horns
RR, Warning Audible - Siren Speakers, Air Horns-E-series
SIREN ELECTRONIC - CONTROL HEADS / AMPS
09-03-1030 RR, Siren Electronic, Whelen 295SLSA1 1
SIREN SPEAKERS
09-03-2040 RR, Speakers, (2) CPI "Though-The-Bumper" for E-Series 109-03-4031 <RR, Siren Electronic, Additional, Whelen 'Howler', Ford E-Series 1
Add black on/off switch next to siren.
09-05-0210 RR, Backup Alarm, No Cutoff 109-06-0200 RR, Emergency Sequencer/Load Manager 1
FRONT WARNING LIGHT CONFIGURATION09-50-1333 <RR, Visual Warning Front Upper - (5) "Cool Bar" (2) Front Wall Configuration 1
:::ENG NOTE:::
VIII-04
06/13/2023 11:36:03 Page 21
PART NO S DESCRIPTION QTY
There will be a Tomar light in the middle of the coolbar.
See 09-70-470S for details.
09-50-SR01 U <Provide and install a Park Cut-Off option.1
SR#2022137F
Also provide and install a park override switch. Locate the switch on the driver's
control module. The following lights and accessories shall be wired to the cut-off
to disengage when the vehicle is placed in "PARK":
• Pre-Emption
• Siren, including the Howler
• All forward facing white flashers
AUXILLARY EMERGENCY LIGHTS09-70-470S U <Tomar RECT- 37SWP-C Clear Strobe for Pre-empt 1
SR#2022137F
TOMAR STROBE RECT 37SWP-C WITH CLEAR LENS WITH
RECT-37-DSMFP DEEP SURFACE MOUNT BEZEL, CHROME COATED ABS.
INCLUDES STROBE CABLE 15CWP2.
The chrome bezel MUST be polyurethane coated black.
This will replace the standard flange that comes with the emitter due to
inadequate spacing inside of the cool bar due to the external condenser.
09-70-4800 <RR, Traffic Pre-Empt - Tomar 401-1228-PREHI w/RECT-37 Strobe Emitter 1
Tomar High Priority Pre-Emption power supply (model number
401-1228-PREHIWP). Over-ride feature wired to disengage when the unit is in
"Park" or "Neutral".
Includes TOMAR RECT-37SWP Clear Strobe with chrome flange to be used as
Traffic Emitter.
Specify Location.
09-70-5310 <RR, Lights, Rear Chevron, Angled, LED Strip Lights in extruded channel, Per CAs 1
#KFA-RR-CRA-1. Includes Chevron flasher set, KFA-CIO-01
Punch slots in the rear body panel to accommodate.
LED colors will be combination Red/Amber.
RR to laser cut mirrored S/S cover panels. These panels will be shipped loose if
rear reflective chevrons are not in the work order.
This feature is similar to the flashing rub rail lights. Requires special flasher with
two separate left and right modules.
The Top, middle, and Lower angled lights are to be solid RED LED's only when
the OEM brakes are applied. This will override the emergency light function. This
feature also applies when not in emergency mode.
The (2) angled light above and below the center angled light are to be flash
AMBER LED's only when the corresponding OEM turn signals are applied.
This will override the emergency light function. This feature also applies when
not in emergency mode.
Red and Amber LED's are to be wired to master emergency lights and alternate
Red then Amber.
Chevron strip lights to be centered in reflective chevron stripes (if ordered).
VIII-04
06/13/2023 11:36:03 Page 22
PART NO S DESCRIPTION QTY
09-80-3200 < >RR, Emergency Flashers Set to, Custom Flash Pattern 1
Emergency Flashers Set to - Custom Flash Pattern
All M9/M7 split lights to have (4) wires each to terminate in #1
compartment dead space. (2) power wires, (1) Sync wire and(1) program wire
per light. ALL ground wires will terminate at stud or buss bar.
All program wires to terminate to a terminal stud labeled
Program Wires. All Sync wires to terminate to a terminal stud
labeled Sync Wires. There will be (3) terminal strips for the
power wires labeled Flasher 1, Flasher 2, Flasher 3. Power
wires to be wired as follows:
All colored sections of the M9 lights to be wired to Flasher 1.
Rear center M7 amber to be wired to flasher 1.
All white sections of the M9 lights to be wired to Flasher 2.
All split M7 lights (Both Sections) to be wired to flasher 3.
Grille lights (both sections) to be wired to Flasher 3.
Each terminal strip to be controlled through the VMUX system using the lights
internal flasher.
All lighting to be programmed to Triple Flash 75.
Flashers 1, 2, and 3 will be "ON" in primary.
Flashers 2 and 3 will "Cut-out" in secondary.
09-80-SR01 U <Wire side and rear emegency flashers to flash when vehicle placed in
reverse 1
SR#2022137F
Wired to flash when in reverse.
WARNING LIGHTS
LED Series - M9 (Flange Included)09-95-15SR U <M9 Duo LED Red/Blue SMOKE Lens (Internal Flasher)7
SR#2022137F
M92J WITH M9WLENX
Front Body - Upper Curbside Corner
Primary/Secondary
Set lights to Triple Flash 75
MODULE SIDES LIGHTING
Streetside Body - Upper Forward
Curbside Body - Upper Rearward
Primary/Secondary
Set lights to Triple Flash 75
MODULE REAR LIGHTING
Rear Body - Streetside Corner
Rear Body - Curbside Corner
Primary/Secondary
Set to steady burn and will work through the VMUX Flasher (set flasher to Triple
Flash 75)
Front Body - Upper Streetside Outer = IATS
Front Body - Upper Curbside Inner = IATS
Primary/Secondary
VIII-04
06/13/2023 11:36:03 Page 23
PART NO S DESCRIPTION QTY
Set lights to Triple Flash 75
SMOKE LENSES
09-95-16SR U <M9 Duo LED Red/White SMOKE Lens (Internal Flasher)6
SR#2022137F
M92D WITH M9WLENX
FRONT UPPER BODY LIGHTING
Front Body - Upper Streetside Corner
Primary/Secondary
MODULE SIDES LIGHTING
Streetside Body - Upper Rear
Primary/Secondary
Curbside Body - Upper Forward
Primary/Secondary
MODULE REAR LIGHTING
Rear Body - Upper Center
Primary/Secondary
Front Body - Upper Curbside Outer
Front Body - Upper Streetside Inner
Primary/Secondary
Set lights to Triple Flash 75
SMOKE LENSES
09-95-19SR U <M9 Flange Black M9FB 13
SR#2022137F
Whelen M9 Flanges Black (M9FB) - EACH
LED Series - M7 (Flange included RR)09-95-24SR U <M7 Flange Black M7FB 4
SR#2022137F
M7 black flanges for intersection lights on front fenders and over rear wheel
wells.
09-95-25SR U <Whelen M7 LED - Red/Blue Split SMOKE Lens (Internal Flasher)2
SR#2022137F
SMOKE LENSES Whelen M7 LED - Red/Blue Split SMOKE Lens (Internal
Flasher) IATS Rear Wheel Warning -
Intersector - RH Side = IATS Set lights to Triple Flash 75 L/R M7J with
M7WLENX
Replace Clear Lens with a Smoked Lens
SMOKE LENSES Whelen M7 LED - Red/Blue Split SMOKE Lens (Internal
Flasher), Front Fender Warning -
VIII-04
06/13/2023 11:36:03 Page 24
PART NO S DESCRIPTION QTY
Intersectors - LH Side = ILOS Set lights to Triple Flash 75 L/R M7J M7WLENX
Replace Clear Lens with a Smoked Lens
09-95-27SR U <Whelen M7 - Red/White Split SMOKE Lens (Internal Flasher)2
SR#2022137F
SMOKE LENSES Whelen M7 - Red/White Split SMOKE Lens (Internal Flasher)
IATS Rear Wheel Well Warning Intersectors-
LH Side = IATS Set lights to Triple Flash 75 L/R M7D with M7WLENX
Replace Clear Lens with a Smoked Lens
SMOKE LENSES Whelen M7 - Red/White Split SMOKE Lens (Internal
Flasher), Front Fender Warning -
Intersectors - RH Side = ILOS Set Lights to Triple Flash 75 L/R M7D with
M7WLENX
Replace Clear Lens with a Smoked Lens
09-95-44SR U <Whelen ION Duo TLI2DX Red/White, Smoke Lens 1
SR#2022137F
SMOKE LENSES Whelen ION Duo TLI2DX Red/White, Smoke Lens, ILOS
Grille - Street Side Upper Corner Triple Flash 75 (Sim)
09-95-45SR U <Whelen ION Duo TLI2EX Blue/White, Smoke Lens 1
SR#2022137F
SMOKE LENSES Whelen ION Duo TLI2EX Blue/White, Smoke Lens, IATS
Grille - Curb Side Lower Corner
Triple Flash 75 (Sim)
09-95-46SR U <Whelen ION Duo TLI2JX Blue/Red, Smoke Lens 2
SR#2022137F
SMOKE LENSES Whelen ION Duo TLI2JX Blue/Red, Smoke Lens, ILOS Grille
- Curb Side Upper Corner
Triple Flash 75 (Sim)
SMOKE LENSES Whelen ION Duo TLI2JX Blue/Red, Smoke Lens, IATS Grille
- Street Side Lower Corner
Triple Flash 75 (Sim)
EXTERIOR AUTOMOTIVE LIGHTING10-01-0002 RR, Tail Lights, Brake/Turn, Whelen M62-Series LED, Pair 1
10-01-0007 RR, Back-up Lights, Whelen M62BU, LED Rear, Pair 110-01-01SR U M6 Flange Black M6FB each M6 black flanges for brake, turns and backup lights 4
ICC/MARKER LIGHTS
10-01-2020 RR, Marker/Clearance Lights, Front, Trucklite Model 33 LED, Amber 110-01-2120 RR, Marker/Clearance Lights, Side and Rear, TruckLite Model 33 LED, Red/Amber 1
10-01-3006 S <RR, Black Flange, (1) Whelen M6 6
SR#2020351F
VIII-04
06/13/2023 11:36:03 Page 25
PART NO S DESCRIPTION QTY
M6 black flanges for brake, turns and back-up lights.
10-01-5020 <RR, Outboard Rear Flashers, Wired to OEM Brake Lights 1
The outboard rear emergency flashers shall be wired to the OEM brake lights.These lights shall NOT function as brake lights when Emergency Flashers are
on.
***NOTE***
This will be wired to the red portion of the light heads only!!!!
10-01-8010 < >RR, Relocate Brake/Tail & Backup Lights to rear Diamond Plate, Amber
Turns above 1
The brake/tail and backup lights on the rear of the module shall be located in theoutboard Diamond Plate area below the rear doors. The amber turn lights shall
be located immediately above the license plate frame on the curbside of the
module.
***NOTE***
This is due to the chevrons lights on the rear of the module.
10-01-SR01 U <Whelen Pioneer Summit 58.37" Long Light bar in BLACK 1
SR#2022137F
Whelen Pioneer Summit 58.37" Long Light bar in BLACK - Whelen Part #
S58MB (1) ONE. Light bar to be
located on the front of the module box, centered left to right and directly below
the front Cool Bar and Tomar
Strobe. Shall be wire directly to an On/Off Switch. Light to be mounted to
module using
(3) Three - Whelen Part # SUBKT7B
FLOOD AND LOAD SYSTEMS10-02-01SR U <Whelen M9 Scene Light With Black Flanges (M9LZB)6
SR#2022137F
M9 side scene lights and rear load lights, (2) driver side of module, (2)
passenger side of module and (2) over rear entry doors with black flanges.
10.2.45.1
10-02-3010 <RR, Lighting Operation, Side Scene, Rear Load & Back-Up Lights 1
The electrical system shall be wired so that the rear module load lights and the
lower back-up lights will operate when the rear doors are open, the switch on
the front panel is activated, or when the vehicle is placed in reverse. With the
module power switch "off", both the lower back-up lights and the upper load
lights will operate when the vehicle is placed in reverse. The curbside scene
lights will operate when the curbside door is opened.
10-02-3130 < >RR, Lighting Operation, Feature, Scene & Load Light, Auto-Reset Cutout Switch 1
The side and rear flood lights shall include auto-reset cutout switches. (1)
Momentary cutout switch shall be located on the curbside wall at the head of
squad bench and (1) switch shall be mounted on the curbside rear door panel.
Cab Entry - Lighting10-02-8020 <RR, Light, Cab Entry, 4" Whelen LED Courtesy Lighting 1
VIII-04
06/13/2023 11:36:03 Page 26
PART NO S DESCRIPTION QTY
There shall be (1) Whelen 4" Super LED courtesy light recessed in the front
stone guard directly over the running board on each side of the cab. These
lights shall be wired so that they are activated when either cab entry door is
opened.
10-02-SR01 U <Luma Bar Stand Alone LED Ground Lights w. Angled Bracket IATS 42"
Street Front 1
SR#2022137F
Street Side - One (1) AY-9220-42 (42") White LED bar light with LEFT bracket to
shine outward. Location: Street
side front of rear wheel, below Compartments #1 and #2, under body.
AY-9220-42-L-0
1. Will have a VMUX button labeled as Ground Lights.
2. Will come on with the corresponding compartment door while the vehicle is
on park and act as courtesy lights for 29 seconds (similar to the Kinequip rub rail
light function).
10-02-SR02 U <Luma Bar Stand Alone LED Ground Lights w/ Angled Bracket IATS 22" Street Rear 1
SR#2022137F
Street Side Rear -One (1) AY-9220-22 (22") White LED bar light with LEFT
bracket to shine outward. Location: Street side rear of rear wheel, under
Compartment #4, under body.
AY-9220-22-L-0
1. Will have a VMUX button labeled as Ground Lights.
2. Will come on with the corresponding compartment door while the vehicle is
on park and act as courtesy lights for 29 seconds (similar to the Kinequip rub rail
light function).
10-02-SR03 U <Luma Bar Stand Alone LED Ground Lights w/ Angled Bracket IATS 42"
Curb Front 1
SR#2022137F
Curb side- One (1) AY-9220-42 (42") White LED bar light with RIGHT bracket to
shine outward. Location: Street
side front of rear wheel, below Side Door P1 and Compartment #8, under body.
AY-9220-42-R-0
1. Will have a VMUX button labeled as Ground Lights.
2. Will come on with the corresponding compartment door while the vehicle is
on park and act as courtesy lights for 29 seconds (similar to the Kinequip rub rail
light function).
10-20-SR04 U <Luma Bar Stand Alone LED Ground Lights w/ Angled Bracket IATS 22"
Curb Rear 1
SR#2022137F
Curb side rear- One (1) AY-9220-22 (22") White LED bar light with RIGHT
bracket to shine outward. Location: Curb side rear of rear wheel, under
VIII-04
06/13/2023 11:36:03 Page 27
PART NO S DESCRIPTION QTY
Compartment #6, under body.
AY-9220-22-R-0
1. Will have a VMUX button labeled as Ground Lights.
2. Will come on with the corresponding compartment door while the vehicle is
on park and act as courtesy lights for 29 seconds (similar to the Kinequip rub rail
light function).
11 - INTERIOR LIGHTING11-01-1400 <RR, Dome Lights - (11) Kinequip 8" Round LED 1
The interior lighting system shall consist of (11) Kinequip 8" Round LED Dome
Lights fixtures in the following configuration:
(3) Cot lights In the medical device rail over the primary cot
(2) Bench lights over the squad bench
(3) Dome lights Street side
(1) Dome light Curbside over head of squad bench
(1) Dome light Curbside rear
(1) Dome Light over the walkway
The four outside corner lights and the (1) light over the CPR seat area and the
(1) over the walkway shall be designated module dome lights and be activated
when the side or rear module entrance doors are opened or by a three-way
circuit allowing these lights to be turned on and off from cab or module. The
lights over the primary cot and squad bench shall have switches in the module
that will allow independent high/low/off control.
11-01-9000 <RR, Timer -15 minute- Restocking 1
Change timer to 30 minutes ILO 15 min
(1) Located at the head of the squad bench in the curbside medical device rail.
SR2022137F
11-01-90SR U <Change timer to 30 minutes restocking 1
SR#2022137F
Change timer to 30 minutes ILO 15 min
(1) Located at the head of the squad bench in the curbside medical device rail.
ATTENDANT LIGHT
11-03-1010 <RR, Attendant Light - 6" x 14" Diffusion Plate Light 1
The cabinet above the light will have a sweep out cover panel over the wiring on
the floor of the cabinet if the switch panel is not part of the design of the upper 2
cabinets.
SHORELINE INLET
12-01-5400 <RR, Shoreline Inlet, Kussmaul Super Auto-Eject, 20A 1
Shore Inlet, 20 AMP, Auto Eject ILOS.
20 AMP/125VAC shoreline inlet in lieu of standard 15 amp. Includes mating
female connector body for inlet and 20 amp
GFI circuit breaker combo in lieu of standard 15 amp.
12-01-6300 RR, Kussmaul, Eject,Cover,15 or 20A,Red 112-01-8000 <RR, Shoreline Indicator, (1), "ON" Green OS Mini Indicator Light 1
Whelen Mini OS.
12-01-9020 <RR, GFI Box Location- Behind Driver's Seat 1
Install the breaker box installed behind the driver's seat.
See CA drawings sheet 11 of 11 for reference.
VIII-04
06/13/2023 11:36:03 Page 28
PART NO S DESCRIPTION QTY
12-02-0200 <RR, Outlets, Interior, 125V-15A (1) Action Wall, (1) Right Stack 1
(1) outlet shall be mounted on the action area medical rail
(1) outlet shall be mounted above the shelf in cabinet L8.
12-02-2049 <RR, Outlets, Interior, Each, Additional, 125V-15A, Aft CPR Seat Counter 1
(1) 110v outlet above the counter aft of the CPR seat.
SEE CA DRAWINGS.
12-02-2051 S <RR, Outlets, Interior, Each, Additional, 125V-15A, Right Stack 3
(1) below the shelf in the L8 cabinet.
(1) in the U8 above the shelf.
(1) in the U8 below the shelf.
All of the 110v outlets shall be in line with one another.
12-02-2052 <RR, Outlets, Interior, Each, Additional, 125V-15A, Over Squad Bench 1
(1) ADDITIONAL 125 V OUTLET ON THE WALL REARWARD OF THE
REARWARD MOST SQUAD BENCH SEAT.
12-02-2100 < >RR-Outlets, Interior, Additional, 125V-15A, Custom Location, Each 1
Exterior #2 Compartment Wall 1
Mount up high and to the outside.
12-02-2101 < >RR, Outlets, Interior, Additional,125V-15A, Surface Mount, Custom
Location, Each 3
(1) SURFACE MOUNT 125V OUTLET IN THE CAB BEHIND THE DRIVER'S
SEAT ON THE WALL
(1) in #4 compartment next to 12V Outlet
(1) in #6 compartment next to 12V Outlet
See CA drawings!!
BLOCKHEATERS
12-02-4001 <Block Heater - With OEM Plug 1
This option does not include a switch.
(STANDARD).
INVERTER - 125VAC12-03-1110 S < >RR, Inverter Charger - Vanner LifeSine, with charger indicator on Console 1
Install the inverter in the interior L1 cabinet.
13 - ENVIRONMENTAL SYSTEMS
13-00-SR01 U <Firecom FHW505, (4) headsets With WB505R Wireless base station 1
SR#2022137F
Firecom FHW505, (4) headsets and system to connect to radios also.
With WB505R Wireless base station, external antenna 114-0138-00, 5100D
digital intercom for (1) radio connection, (1) mobile radio interface cable MR-52X
(for a Motorola APX 6500), (4) Hanger hook headset-black 520-0676-00
Everest supply and install per previous vehicle.
VIII-04
06/13/2023 11:36:03 Page 29
PART NO S DESCRIPTION QTY
ENVIROMENTAL CLIMATE CONTROL SYSTEM
13-01-1200 RR, HVAC - Central Air Flow Discharge (UM & UM-150)113-01-2000 RR, Climate Control - (UM & UM-150)1
13-02-0222 RR, Exhaust Fan- Upgrade 230 CFM, (2) Speed,Standard Location 1
HVAC BASE SYSTEM - HOSELINE
13-02-5701 S <RR, Cover, Cool Bar, (4) M9 series lights only. Center light position Tomar 1
Drawing # 314710
Note: Will be painted same color as the mount location on box front.
(4) M9 series lights only. Center light position will be for Tomar emitter light head.
13-02-5711 >RR, HVAC Aux Front Wall Coolbar, Hoseline, Ford E-series BRUSHLESS
Motor 1
13-03-1000 RR, Return Air System 113-03-2000 RR, Return Air Central Plenum 1
13-03-3000 RR, Heat/AC Cabinet 1
14 - MEDICAL SYSTEMS
COT MOUNTING PROVISIONS14-01-1010 RR, Cot Mounting, Hardware 1
14-01-1110 RR, Post & Wheel Cups, None 114-01-1622 <RR, Stryker Power Load/ Performance Load, Floor Plates and Wiring for Future Ins 1
Additional floor structure for future installation of a Stryker #6390 Power-LOAD
system or 9392 Performance Load.
Includes pre-wire which will terminate under the attendant's seat
14-01-1650 S <RR, Mass Casualty Hardware for Power Load 1
The hardware for Mass Casualty shall be added to the Stryker Power load
System to allow the unit to load cots as necessary.
14-01-1926 <RR, Cut Floor and Install Cot Mount Floor plate, 6390-700-001A 1
For Powerload or Performance Load Cot mounts.
14-01-4028 Center Mount 1
OXYGEN AND AIR SYSTEMS
14-02-0100 RR, O2 System, Multiplex 114-02-1000 RR, O2 Cylinder Wrench 1
14-02-2000 RR, O2 Cylinder Bracket - Zico #QR-MV 114-02-3000 RR, O2 Control - Electric with Manual Bypass on Action Wall.1
14-02-3162 S RR, O2 Cylinder for Hand Tight Connection, WES-663 with WES-662P 114-02-4000 <RR, O2 Outlets, Ohio Style, (2) Action Wall, (1) Squad Bench 1
(2) O2 outlets in Action area medical device rail
(1) O2 outlet CS Wall head of squad bench up high directly on the wall.
14-02-4211 <RR, O2 Outlet, Ohio Style, Additional in Ceiling 1
See CA drawings for location.
14-02-6150 < >RR, O2 Cylinder Holder, Zico QR-D-2 Strapless "D" Bracket, CN 10 Certified, Each 2
Located recessed into the head of Squad Bench, curb side.
SUCTION SYSTEM14-03-1010 < >RR, Suction System, SSCOR On-Board 1
Conforms to J3043 requirements
MISC MEDICAL14-04-1000 S <RR, Fire Extinguisher, 5# ABC w/ Mounting Bracket 1
SR2022137F
RR, Fire Extinguisher, 5# ABC w/ Mounting Bracket HD Amerex Bracket #861H
with Amerex 5LB fire
VIII-04
06/13/2023 11:36:03 Page 30
PART NO S DESCRIPTION QTY
extinguisher.
Ship Loose!!
14-04-2045 < >RR, Heat Pad/IV warmer with anodized sweep out cover for interior cabinet.3
Mounted in cabinet:________
ALL WIRING TO BE COVERED AND CONCEALED.
(1) IN U2.5 CABINET ON THE BOTTOM OF THE CABINET FLOOR.
(2) IN U7 and U7.5 CABINET BOTTOMS
15 - PAINT / DECALS AND NOMENCLATURE
PAINT AND FINISH
15-00-0100 RR, Road Rescue Paint Process 115-01-2010 < >Module Paint, Paint other than OEM, Other than Red or Metallic 1
SIKKENS Paint: RED FLNA 3047
MODULE ROOF ALSO TO BE PAINTED RED FLNA 3047
15-01-5600 <Cab Paint - Single Color, Repaint other than OEM, Red or Metallic 1
SIKKENS PAINT: RED FLNA 3047
CAB ROOF TO BE ALSO PAINTED RED FLNA 3047.
THE CAB Window INSERT MUST MATCH THE AREA THAT IT IS INSERTED
INTO
15-02-3001 RR, Pinstripe, None, Fine Line Paint Edge 1
GRAPHICS AND LETTERING15-03-3900 RR, Badge Logos 1
15-03-4000 RR, Logos and Model Name 115-03-4001 RR, Ultramedic - Black Logos 1
15-04-1010 RR, Nomenclature Plaques. UNLEADED.116-01-0200 RR, Owner's Manual 1
74-09-0099 <Indemnification Statement 1
The purchaser agrees to defend, indemnify and hold Rev Ambulance Group
harmless from any claims, costs (including actual attorneys' fees), damages and
liabilities caused in whole or in part by any alteration or modification of, or
changes or additions to the purchased products OR use of product for
purposes it was not designed or intended for.
== Factory Ship Loose - EMS Equipment - 1.007 05/27/21 ==
Subtotal 286,024.00
Delivery 2,500.00
Ford GPC Discount (subject to availability) -1,900.00Ferno Equipment (subject to Ferno pricing) 12,998.00
EEV Install, Radios, Computer Equip.NO FIRECOM 9,016.00Graphics by Advance 2,900.00
All ancillary quotes subject to price increase!! 1.00
Total 311,539.00
VIII-04